Burkert Flowave 8098, Operating Instructions Manual

Page: 205 / 354

205
SAW sensor – Parameter
Type 8098 FLOWave L
15.10.6 Resetting the default values of the error limits, the warning
limits and the hysteresis of each volume totalizer
The default values of the error limits, the warning limits and the hysteresis of the volume totalizers are the
following:
•
high error value: 10,000,000 m
3
,
• low error value: –10,000,000 m
3
,
• high warning value: 8,000,000 m
3
,
• low warning value: –8,000,000 m
3
,
• value of the hysteresis: 0.0 m
3
.
To reset the default values of the error limits, the warning limits and the hysteresis of each volume totalizer,
do the following:
→
Go to the CONFIGURATION view.
→
SAW sensor
→
Confirm to access the Parameter view.
→
Stand. meas. values Totalizer 1 or Totalizer 2
→
Limits
→
Reset to default
→
Confirm.
The limit values and the hysteresis value are reset.
→
Go back to the parent menu.
15.10.7 Enabling the user to start, stop or reset each volume totalizer
By default, the user is not allowed to start, to stop or to reset a volume totalizer.
To authorize the user to start, to stop or to reset a volume totalizer, do the following:
→
Go to the
CONFIGURATION
view.
→
SAW sensor
→
Confirm to access the Parameter view.
→
Stand. meas. values Totalizer 1 or Totalizer 2
→
Start/Stop/Reset
→
Enabled
→
Save.
The user is authorized to start, to stop or to reset a volume totalizer.
English