Burkert Flowave 8098, Operating Instructions Manual

Page: 137 / 354

137
General settings – Diagnostics
Type 8098 FLOWave L
13.4.7 Reading out the number of failed reconfigurations
The value is valid since the last device start-up.
Do the following:
→
Go to the
CONFIGURATION
view.
→
General settings
→
Confirm to access the Parameter view.
→
Go to the DIAGNOSTICS view.
→
Configuration provider
→
Number of failed reconfigurations
→
Go back to the parent menu.
13.4.8 Erasing the configuration data of a single module
This function is only available on the PC software Bürkert Communicator.
If you want to replace the configuration data stored on the configuration memory by the current configu -
ration data of each module, do the following:
Do the following:
→
General settings DIAGNOSTICS Configuration provider Managed devices
→
Click Next to go through the modules which are managed by the configuration provider.
→
When the module whose data must be erased is displayed, check the box Erase configuration of client
→
To erase the configuration data of the selected modules, click Finish .
The current configuration data of the selected modules is stored on the configuration memory.
English