Burkert Flowave 8098, Operating Instructions Manual

Page: 294 / 354

294
Outputs – Parameter
Type 8098 FLOWave L
→
On/off
→
Settings
The
Current settings
are displayed
→
Choose the events
→
Choose to invert the switching or not (see Fig. 68 and Fig. 69 )
→
Set the value of the switching time delay The New settings are displayed.
→
Save.
The digital output is configured as an on/off output.
18.5.2 Configuring a digital output as an output with switching
thresholds
An output with switching thresholds switches depending on two threshold process values.
The output can switch either according to an hysteresis model or according to a window model.
Hysteresis switching
The output status changes when a threshold is reached:
•
by increasing values, the output state changes when the high threshold X+ is reached.
• by decreasing values, the output state changes when the low threshold X- is reached.
ON
OFF
Contact
X- X+
process value
Not inverted
ON
OFF
Contact
X- X+
process value
Inverted
X- = low switching threshold
X+ = high switching threshold
Fig. 68: Hysteresis switching
Window switching: the output state changes as soon as any threshold (X- or X+) is reached.
Contact
X- X+
process value
Not inverted
ON
OFF
Contact
X- X+
process value
Inverted
ON
OFF
X- = low switching threshold
X+ = high switching threshold
Fig. 69: Window switching
English