Burkert Flowave 8098, Operating Instructions Manual

Page: 233 / 354

233
SAW sensor – Parameter
Type 8098 FLOWave L
15.13.10 Resetting the default values of all the acoustic transmission
factor parameters
To reset all the default values of all the acoustic transmission factor parameters, do the following:
→
Go to the CONFIGURATION view.
→
SAW sensor
→
Confirm to access the Parameter view.
→
Add. meas. value
→
Acoustic transmission factor
→
Reset to default
Confirm.
All the acoustic transmission factor parameters are reset.
→
Go back to the parent menu.
15.14 Diagnostics: monitoring special events that occur in
the process, on the sensor or on the electronics
You can be informed when a special event occurs in the process, on the sensor or on the electronics of the
device. You can also choose each event to be a normal operating.
The possible events are listed in Table 32 in Table 33 and in Table 34
.
→
To be informed if a special event occurs in the process, on the sensor or on the electronics, configure
the diagnostics as shown in the flowchart in Fig. 64 on page 235 .
You can be informed through the colour of the device status indicator and/or through a message and/or
through one or several outputs as shown in the flowcharts in Fig. 65 and in Fig. 66 .
English