Burkert Flowave 8098, Operating Instructions Manual

Page: 117 / 354

117
General settings – Parameter
Type 8098 FLOWave L
12.7.1 Reading out the 2 error limit values
To read out the limits the supply voltage of the device should be in, do the following:
→
Go to the CONFIGURATION view.
→
General settings
→
Confirm to access the
Parameter
view.
→
Alarm limits
→
Supply voltage or Device temperature
→
Error high or Error low
→
Go back to the parent menu.
12.7.2 Changing the 2 warning limit values
To change the warning limits of the supply voltage or of the device temperature, do the following:
→
Go to the CONFIGURATION view.
→
General settings
→
Confirm to access the Parameter view.
→
Alarm limits
→
Supply voltage
or
Device temperature
→
Warning high or Warning low
→
Set the warning limit.
→
Save.
The warning limits are changed.
12.7.3 Reading out the hysteresis value
To read out the hysteresis value, do the following:
→
Go to the CONFIGURATION view.
→
General settings
→
Confirm to access the
Parameter
view.
→
Alarm limits
→
Supply voltage or Device temperature
English