X20 system modules • Counter modules • X20DC1178
680
X20 system User's Manual 3.10
4.11.4.9.3.6 Enable/disable error monitoring for the signal channels
Name:
CfO_BWSSIEnableMaskChannel7_0
This register allows error monitoring for each of the signal channels to be enabled individually. "Open line", "short
circuit" and "voltage level too low" are reported as error states. Any errors that occur are reported in the error
status registers.
Data type
Value
USINT
See bit structure.
Bit structure:
Bit
Name
Value
Information
0
Error monitoring switched off
0
Encoder signal D
1
Error monitoring enabled
1 - 7
Reserved
0
4.11.4.9.3.7 Physical configuration
The following registers must be set to the specified constant value for correct physical configuration:
Constant register "CfO_BWQuitTimeSelChannel7_0"
Name:
CfO_BWQuitTimeSelChannel7_0
Data type
Value
Information
USINT
0
Only default in the bus controller module
Summary of Contents for X20 System
Page 2: ......
