B&R Industries X20 System, User Manual

Page: 456 / 2720

X20 system modules • Analog output modules • X20AO2622
456 X20 system User's Manual 3.10
Product ID X20AO2622
Environmental conditions
Temperature
Operation
Horizontal installation -25 to 60°C
Vertical installation -25 to 50°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical characteristics
Note Order 1x X20TB06 or X20TB12 terminal block separately
Order 1x X20BM11 bus module separately
Spacing 12.5
+0.2
mm
Table 92: X20AO2622 - Technical data
1) 4 to 20 mA: From upgrade version 1.0.2.0 or hardware revision "I0"
2) Based on the current output value.
3) Based on the entire output range.
4) Based on the output range.
4.4.4.4 LED status indicators
For a description of the various operating modes, see the 2.11.1 "re LEDs" section.
Figure LED Color Status Description
Off No power to module
Single flash RESET mode
Double flash BOOT mode (during firmware update)
1)
Blinking PREOPERATIONAL mode
r Green
On RUN mode
Off No power to module or everything OK e Red
On Error or reset status
e + r Red on / Green single flash Invalid firmware
Off Value = 0 1 - 2 Orange
On Value ≠ 0
1) Depending on the configuration, a firmware update can take up to several minutes.
4.4.4.5 Pinout
Each channel can be configured for either current or voltage signals. The type of signal is also determined by the
connection terminals used.
AO + 1 I
AO + 1 U
AO - 1 U/I
AO + 2 I
AO + 2 U
AO - 2 U/I
1
X
20
A
O
2
62
2
2
r e