X20 system modules • Other functions • X20CM4810
X20 system User's Manual 3.10
2111
FrequencyBandNoiseVelRaw
The noise value formed from the envelope signal of the oscillation acceleration in a freely selectable frequency
range.
This frequency band is only calculated if the EnableVelocityCalculation bit (configured in the "SensorConfig01"
register) of the respective channel is set; otherwise, 0 is output.
Example:
Imbalance of toothed belts
FrequencyBandNoiseAccEnvelope
The noise value formed from the envelope signal of the oscillation acceleration in a freely selectable frequency
range.
Example:
Imbalance of toothed belts
FrequencyBandNoiseVelEnvelope
The noise value formed from the envelope signal of the oscillation acceleration in a freely selectable frequency
range.
This frequency band is only calculated if the EnableVelocityCalculation bit (configured in the "SensorConfig01"
register) of the respective channel is set; otherwise, 0 is output.
Example:
Imbalance of toothed belts
FrequencyBandNoiseAccRaw
The noise value formed from the envelope signal of the oscillation acceleration in a freely selectable frequency
range.
Example:
Imbalance of toothed belts
FrequencyBandRmsVelRaw
The RMS value formed from the raw signal of the oscillation velocity in a freely selectable frequency range.
This frequency band is only calculated if the EnableVelocityCalculation bit (configured in the "SensorConfig01"
register) of the respective channel is set; otherwise, 0 is output.
Example:
Imbalance of toothed belts
Summary of Contents for X20 System
Page 2: ......
