X20 system modules • Bus receivers and Bus transmitters • X20BR9300
X20 system User's Manual 3.10
601
4.8.2 X20BR9300
4.8.2.1 General information
The bus receiver X20BR9300 is used to connect the X20 System to the X2X Link. The module is equipped with
a feed for the X2X Link as well as the internal I/O supply.
The left and right end plates are included in the delivery.
•
X2X Link bus receiver
•
Feed for X2X Link and internal I/O supply
•
Electrical isolation of feed and X2X Link supply
•
Redundancy of X2X Link supply possible by operating multiple supply modules simultaneously
•
Operation only on the slot to the far left
4.8.2.2 Order data
Model number
Short description
Figure
Bus receivers and transmitters
X20BR9300
X20 bus receiver, X2X Link, supply for X2X Link and inter-
nal I/O supply, X20 locking plates (left and right) X20AC0SL1/
X20AC0SR1 included
Required accessories
Bus modules
X20BM01
X20 power supply bus module, 24 VDC keyed, internal I/O sup-
ply interrupted to the left
Terminal blocks
X20TB12
X20 terminal block, 12-pin, 24 VDC keyed
Optional accessories
X2X Link cable
X67CA0X99.1000
Cable for custom assembly, 100 m
X67CA0X99.5000
Cable for custom assembly, 500 m
Table 199: X20BR9300 - Order data
Information:
This module is NOT PERMITTED to be used together with continuous power supply modules (e.g.
X20BM11 or X20BM15) since this can result in problems with X2X Link!
Summary of Contents for X20 System
Page 2: ......
