B&R Industries X20 System, User Manual

Page: 831 / 2720

X20 system modules • Counter modules • X20DC2395
X20 system User's Manual 3.10 831
4.11.14.12.9.8 Count falling trigger edges
Name:
CountFallingCH01 to CountFallingCH04
These registers contain cyclic counters that are incremented with every detected falling edge on the respective
channel.
Data type Value Information
USINT 0 to 255 Counter for falling edges
4.11.14.12.9.9 Count rising trigger edges
Name:
CountRisingCH01 to CountRisingCH04
These registers contain cyclic counters that are incremented with every detected rising edge on the respective
channel.
Data type Value Information
USINT 0 to 255 Counter for rising edges
4.11.14.12.9.10 Time stamp of falling edge
Name:
TimeStampFallingCH01 to TimeStampFallingCH04
When a falling edge occurs on the respective channel, the current counter value of the module timer is copied
to these registers.
Data type Value Information
UINT 0 to 65,535 Time stamp for rising edges
4.11.14.12.9.11 Time stamp of the rising edge
Name:
TimeStampRisingCH01 to TimeStampRisingCH04
When a rising edge occurs on the respective channel, the current counter value of the module timer is copied to
these registers.
Data type Value Information
UINT 0 to 65,535 Time stamp for rising edges
4.11.14.12.9.12 Time difference of falling edge
Name:
TimeDiffFallingCH01 to TimeDiffFallingCH04
When a falling edge occurs on the respective channel, the time difference compared to the starting edge configured
in bit 4 of the 4.11.14.12.9.2 "CfO_EdgeTimeFallingMode" register is copied to this register.
Data type Value Information
UINT 0 to 65,535 Time difference from starting edge
4.11.14.12.9.13 Time difference of rising edge
Name:
TimeDiffRisingCH01 to TimeDiffRisingCH04
When a rising edge occurs on the respective channel, the time difference compared to the starting edge configured
in bit 4 of the 4.11.14.12.9.3 "CfO_EdgeTimeRisingMode" register is copied to this register.
Data type Value Information
UINT 0 to 65,535 Time difference from starting edge