B&R Industries X20 System, User Manual

Page: 2238 / 2720

X20 system modules • Other functions • X20CM8323
2238 X20 system User's Manual 3.10
4.26.4.9.5.4 Status of the outputs
Name:
StatusInput01
This register indicates whether a switching point has been found for a channel.
Data type Value
USINT See bit structure.
Bit structure:
Bit Description Value Information
0 Channel 1 was not switched or no switching point was found 0 Switching point
1 Switching point found for Channel 1
... ...
0 Channel 8 was not switched or no switching point was found 7 Switching point
1 Switching point found for Channel 8
4.26.4.9.5.5 Module status
Name:
StatusInput02
The current module status is indicated in this register.
Data type Value
USINT See bit structure.
Bit structure:
Bit Description Value Information
0 - 2 Reserved 0
0
No overcurrent 3 Overload cutoff
1 Overcurrent cutoff activated
4 - 7 Reserved 0
4.26.4.9.5.6 Switching delay of channels
Name:
StatusOutput01
2 bits of this register are used to set the switching delay for each channel. Values of the switching delay are specified
in quarter-steps of the X2X Link cycle.
Data type Value
UINT See bit structure.
Bit structure:
Bit Description Value Information
00 No delay
01 1/4 of the X2X Link cycle
10 2/4 of the X2X Link cycle
0 - 1 Switching delay of channel 1
11 3/4 of the X2X Link cycle
2 - 3 Switching delay of channel 2 x For possible values, see channel 1.
... ...
14 - 15 Switching delay of channel 8 x For possible values, see channel 1.