Raritan PX3-1000 series, Руководство пользователя

Страница: 312 / 744

Chapter 6: Using the Web Interface
290
Action Function
Execute an action
group Creates a group of actions comprising existing
actions. See
Action Group
(on page 292).
External beeper Enables or disables the connected external
beeper, or causes it to enter an alarm cycle.
See
External Beeper (on page 293).
Internal beeper Turns on or off the internal beeper. See
Internal Beeper
(on page 294).
Log event message Records the selected events in the internal log.
See
Log an Event Message (on page 294).
Push out sensor
readings Sends internal sensor log, environmental
sensor log or asset management strip data to a
remote server using HTTP POST requests. See
Push Out Sensor Readings
(on page 294).
Record snapshots to
webcam storage Makes a connected webcam start or stop
taking snapshots. See
Record Snapshots to
Webcam Storage
(on page 295).
Request LHX/SHX
maximum cooling Applies the maximum cooling to the LHX/SHX
device. See
Request LHX/SHX Maximum
Cooling (on page 296).
This option is available only when the Schroff
LHX/SHX support has been enabled.
Send email Emails a textual message. See Send Email (on
page 296).
Send sensor report Reports the readings or status of the selected
sensors, including internal or external
sensors. See
Send Sensor Report (on page
297).
Send SMS message Sends a message to a mobile phone. See
Send
SMS Message
(on page 299).
Send snapshots via
email Emails the snapshots captured by a connected
Logitech
®
webcam (if available). See Send
Snapshots via Email
(on page 300).
Send SNMP
notification Sends SNMP traps or informs to one or
multiple SNMP destinations. See
Send an
SNMP Notification (on page 300).