Raritan PX3-1000 series, Руководство пользователя

Страница: 518 / 744

Chapter 8: Using the Command Line Interface
496
Note: If the requested sensor type is not supported, the "Sensor is
not available" message is displayed.

<option> is one of the options: enable, disable or a numeric value.
Option Description
enable Enables the specified threshold for a specific
outlet sensor.
disable Disables the specified threshold for a specific
outlet sensor.
A numeric
value Sets a value for the specified threshold of a
specific outlet sensor and enables this threshold
at the same time.

<hy_value> is a numeric value that is assigned to the hysteresis for
the specified outlet sensor. See
"To De-assert" and Deassertion
Hysteresis
(on page 680).

<as_value> is a number in samples that is assigned to the assertion
timeout for the specified outlet sensor. See
"To Assert" and
Assertion Timeout (on page 678).
Commands for Inlet Sensors
A sensor configuration command for inlets begins with sensor inlet.
You can configure various inlet sensor threshold settings at a time by
combining multiple commands. See
Multi-Command Syntax
(on page
520).
Set the Upper Critical threshold for an inlet sensor:
config:# sensor inlet <n> <sensor type> upperCritical <option>
Set the Upper Warning threshold for an inlet sensor:
config:# sensor inlet <n> <sensor type> upperWarning <option>
Set the Lower Critical threshold for an inlet sensor:
config:# sensor inlet <n> <sensor type> lowerCritical <option>
Set the Lower Warning threshold for an inlet sensor: