Raritan PX3-1000 series, Руководство пользователя

Страница: 464 / 744

Chapter 8: Using the Command Line Interface
442
Example
To set the time zone:
1. Type the time zone command as shown below and press Enter.
config:# time zone
2. The system shows a list of time zones. Type the index number of the
desired time zone and press Enter.
3. Type
apply
for the selected time zone to take effect.
Customizing the Date and Time
If intending to manually configure the date and time, use the following
CLI commands to specify them.
Note: You shall set the time configuration method to "manual" prior to
customizing the date and time. See
Determining the Time Setup
Method
(on page 439).
Assign the date:
config:# time set date <yyyy-mm-dd>
Assign the time:
config:# time set time <hh:mm:ss>
Variables:
Variable Description
<yyyy-mm-dd> Type the date in the format of yyyy-mm-dd.
For example, type
2015-11-30 for November 30,
2015.
<hh:mm:ss> Type the time in the format of hh:mm:ss in the
24-hour format.
For example, type
13:50:20 for 1:50:20 pm.