Raritan PX3-1000 series, Руководство пользователя

Страница: 433 / 744

Chapter 8: Using the Command Line Interface
411
Specifying the Device Altitude
This command specifies your PX3 device's altitude above sea level (in
meters). You must specify the PX3 device's altitude above sea level if a
Raritan's DPX differential air pressure sensor is attached. This is
because the device's altitude is associated with the altitude correction
factor. See
Altitude Correction Factors (on page 684).
config:# pdu deviceAltitude <altitude>
Variables:

<altitude> is an integer between 1 and 3000 meters.
Setting the Z Coordinate Format for Environmental Sensors
This command enables or disables the use of rack units for specifying
the height (Z coordinate) of environmental sensors.
config:# pdu externalSensorsZCoordinateFormat <option>
Variables:

<option> is one of the options: rackUnits or freeForm.
Option Description
rackUnits The height of the Z coordinate is measured in
standard rack units. When this is selected, you
can type a numeric value in the rack unit to
describe the Z coordinate of any environmental
sensors or actuators.
freeForm Any alphanumeric string can be used for
specifying the Z coordinate.
Note: After determining the format for the Z coordinate, you can set a
value for it. See
Setting the Z Coordinate
(on page 489).