Raritan PX3-1000 series, Руководство пользователя

Страница: 323 / 744

Chapter 6: Using the Web Interface
301
To send SNMP v2c notifications:
1. In the Notification Type field, select SNMPv2c Trap or SNMPv2c
Inform.
2. For SNMP INFORM communications, leave the resend settings at
their default or do the following:
a. In the Timeout field, specify the interval of time, in seconds, after
which a new inform communication is resent if the first is not
received. For example, resend a new inform communication
once every 3 seconds.
b. In the Number of Retries field, specify the number of times you
want to resend the inform communication if it fails. For example,
inform communications are resent up to 5 times when the initial
communication fails.
3. In the Host fields, enter the IP address of the device(s) you want to
access. This is the address to which notifications are sent by the
SNMP system agent.
4. In the Port fields, enter the port number used to access the
device(s).
5. In the Community fields, enter the SNMP community string to access
the device(s). The community is the group representing the PX3 and
all SNMP management stations.
Tip: An SNMP v2c notification action permits only a maximum of three
SNMP destinations. To assign more than three SNMP destinations to a
specific rule, first create several SNMP v2c notification actions, each of
which contains completely different SNMP destinations, and then add all
of these SNMP v2c notification actions to the same rule.
To send SNMP v3 notifications:
1. In the Notification Type field, select SNMPv3 Trap or SNMPv3 Inform.
2. For SNMP TRAPs, the engine ID is prepopulated.
3. For SNMP INFORM communications, leave the resend settings at
their default or do the following:
a. In the Timeout field, specify the interval of time, in seconds, after
which a new inform communication is resent if the first is not
received. For example, resend a new inform communication
once every 3 seconds.
b. In the Number of Retries field, specify the number of times you
want to resend the inform communication if it fails. For example,
inform communications are resent up to 5 times when the initial
communication fails.