Raritan PX3-1000 series, Руководство пользователя

Страница: 198 / 744

Chapter 6: Using the Web Interface
176

Go to an individual sensor's or actuator's data/setup page by
clicking its name.
If wanted, you can resort the list by clicking the desired column header.
See
Sorting a List
(on page 134).
Sensor/actuator overview on this page:
If any sensor enters the alarmed state, it is highlighted in yellow or red.
See
Yellow- or Red-Highlighted Sensors
(on page 180). An actuator is
never highlighted.
Column Description
Name By default the PX3 assigns a name comprising the
following two elements to a newly-managed
sensor/actuator.

Sensor/actuator type, such as "Temperature" or
"Dry Contact."

Sequential number of the same sensor/actuator
type, like 1, 2, 3 and so on.
You can customize the name. See
Individual
Sensor/Actuator Pages (on page 188).
Reading Only managed 'numeric' sensors show this data,
such as temperature and humidity sensors.
State The data is available for all sensors and actuators.
See
Sensor/Actuator States
(on page 182).
Type Sensor or actuator type.