Raritan PX3-1000 series, Руководство пользователя

Страница: 204 / 744

Chapter 6: Using the Web Interface
182

They show one of the managed states. See
Sensor/Actuator States
(on page 182).

For managed 'numeric' sensors, their readings are retrieved and
displayed. If any numeric sensor is disconnected or its reading
cannot be retrieved, it shows "unavailable" for its reading.
Unmanaged sensors/actuators:

The PX3 neither communicates with unmanaged sensors/actuators
nor retrieves their data.

Unmanaged sensors/actuators are listed only when they are
physically connected to the PX3. They disappear when they are no
longer connected.

They do not have an ID number.

They show the "unmanaged" state.
Sensor/Actuator States
An environmental sensor or actuator shows its real-time state after
being managed.
Available sensor states depend on the sensor type -- numeric or state
sensors. For example, a contact closure sensor is a state sensor so it
switches between three states only --
unavailable, alarmed and normal.
Sensors will be highlighted in yellow or red when they enter abnormal
states. See
Yellow- or Red-Highlighted Sensors
(on page 180).
An actuator's state is marked in red when it is turned on.
Managed sensor states:
In the following table, "R" represents any numeric sensor's reading. The
symbol <= means "smaller than" or "equal to."
State Description
normal

For numeric sensors, it means the
readings are within the normal range.

For state sensors, it means they enter the
normal state.
below lower critical "R" < Lower Critical threshold
below lower warning Lower Critical threshold <= "R" < Lower
Warning threshold
above upper warning Upper Warning threshold < "R" <= Upper
Critical threshold
above upper critical Upper Critical threshold < "R"