Raritan PX3-1000 series, Руководство пользователя

Страница: 158 / 744

Chapter 6: Using the Web Interface
136
Number Section Information shown
Inlet I1

Overview of inlet power data

A current bar per phase, which changes colors to indicate the
RMS current state
- green: normal
- yellow: warning
- red: critical
See
Dashboard - Inlet I1
(on page 137).
Overcurrent
Protectors
This section is available only when your PX3 contains
overcurrent protectors (OCPs).

Overview of each OCP's status

A current bar per OCP, which changes colors to indicate the
RMS current state
- green: normal
- yellow: warning
- red: critical
See Dashboard - OCP (on page 139).
Alerted
Sensors

When no sensors enter the alarmed state, this section shows
the message "No Alerted Sensors."

When any sensor enters the alarmed state, this section lists all
of them.
See Dashboard - Alerted Sensors (on page 140).
Inlet History
The waveform of the inlet's active power history is displayed by
default. You can make it show a different data type.
See
Dashboard - Inlet History
(on page 142).
Alarms
This section can show data only after you have set event rules
requiring users to take the acknowledgment action.

When there are no unacknowledged events, this section shows
the message "No Alarms."

When there are unacknowledged events, this section lists all of
them.
See
Dashboard - Alarms
(on page 143).