Raritan PX3-1000 series, Руководство пользователя

Страница: 486 / 744

Chapter 8: Using the Command Line Interface
464
config:# security ipAccessControl ipv4 rule add 192.168.84.123/24 accept
insertAbove 5
Results:

A new IPv4 firewall control rule is added to accept all packets sent
from the IPv4 address 192.168.84.123.

The newly-added rule is inserted above the 5th rule. That is, the new
rule becomes the 5th rule, and the original 5th rule becomes the 6th
rule.
Example 3 - User Blocking
The following command sets up two user blocking parameters.
config:# security userBlocking maximumNumberOfFailedLogins 5 blockTime 30
Results:

The maximum number of failed logins is set to 5.

The user blocking time is set to 30 minutes.
Example 4 - Adding an IPv4 Role-based Access Control Rule
The following command creates a newIPv4 role-based access control
rule and specifies its location in the list.
config:# security roleBasedAccessControl ipv4 rule add 192.168.78.50 192.168.90.100
admin deny insertAbove 3
Results:

A new IPv4 role-based access control rule is added, dropping all
packets from any IPv4 address between 192.168.78.50 and
192.168.90.100 when the user is a member of the role "admin."

The newly-added IPv4 rule is inserted above the 3rd rule. That is, the
new rule becomes the 3rd rule, and the original 3rd rule becomes
the 4th rule.