manualshive.com logo in svg

Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 93 / 352

Поделиться
Скачать
Comdial DX-80 Скачать руководство пользователя страница 93

DX-80 I

NSTALLATION AND 

M

AINTENANCE 

M

ANUAL

P7290 IMM

3-43

Call Forward – Extension

!2

There are many Extension Call Forward choices:

•

 

All – Forward all of your calls.

•

 

Busy – Forward your calls when your telephone is busy.

•

 

Follow Me – Forward calls at your extension to the extension where you are currently working (conference
room, associates office, etc.)

•

 

Follow Preset – Invoke call forward at your extension so that it can be changed from another extension.

•

 

No Answer – Forward your calls in no answer conditions.

•

 

External – Forward your calls to another location or different telephone number. (This feature must be
enabled for your extension in database administration.)

Forward conditions may be set as follows for each call forward type:

•

 

Intercom calls only

•

 

Intercom and CO Line (including transferred CO Lines) calls

•

 

CO Line calls only

Related Features

Do Not Disturb

Forced Intercom Call Forward

Intercom Mode Selection

Forced Intercom Tone Ring

Messaging – Call Me, Text or Voice

Related Programming

Extension - Receive Assignment
CO Line - Line Assignment
Call Handling - XFR_I Recall, XFR_B Recall, CO Line Preset CFW

Operation – Setup

Press 

!2

. The display will show:

CALL FORWARD

 all  busy next

All Call Forward

1.  Press [

all

].  The display will read:

ALL FWD.    _

bksp  save chg

2.  Input the directory number (extension or Hunt Group) where calls are to be forwarded.

3.  Press [

save

]. Display will show:

ALL FWD     XXX

 co  icm/co icm

Содержание DX-80

































































































































































































































































































































































Отзывы:

Нет отзывов