
DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-22
call processing
that is provided to the caller after they have made a selection and are being routed in the
system.
•
Press [
next
]. The next database item (Waiting Code) displays.
•
To change the
Waiting Code
press [
chg
] (change). The Waiting Code is assigned to provide a caller the
option to wait for a busy extension and try that extension again after 10 seconds. The code may be any dial
pad single-digit from 0-9, *, or #. (Note: The system will not allow any digit to be assigned to more than one
function. Therefore the Inquiry Code and DISA Codes must be considered when changing the Waiting
Code.)
•
Enter the new Waiting Code digit and press [
save
] to store.
•
Press [
next
]. The next database item (Inquiry Code) displays.
•
To change the
Inquiry Code
press [
chg
] (change). The Inquiry Code is assigned to provide a caller the
option to hear a general announcement (company hours, directions to the office, etc.). The code may be any
dial pad single-digit from 0-9, *, or #. (Note: The system will not allow any digit to be assigned to more than
one function. Therefore the Waiting Code and DISA Codes must be considered when changing the Inquiry
Code.)
•
Enter the new Inquiry Code digit and press [
save
] to store.
•
Press [
next
]. The next database item (DISA Code) displays.
•
To change the
DISA Code
press [
chg
] (change). The DISA Code is assigned to provide a caller access to
any DX-80 system resource (e.g., extensions, CO lines, etc.). The code may be any dial pad single-digit
from 0-9, *, or #. (Note: The system will not allow any digit to be assigned to more than one function.
Therefore the Waiting Code and Inquiry Codes must be considered when changing the DISA Code.)
•
Enter the new DISA Code digit and press [
save
] to store.
•
Press [
next
]. The next database item (Answer Position) displays.
•
To change the
Answer Position
press [
show
]. Since Answering Positions may be assigned as unique
destinations per Tenant Group, the system requires this input now.
•
Enter the tenant group for which programming changes are to be made (1-3) (usually “1”) then press
[
show
]. The current Day Mode - Answer Position for the selected tenant group displays.
•
Press [
chg
] (change) to enter a new destination for the Day Mode for this tenant group.
•
Enter the appropriate DX-80 system directory number (extension, UCD group, Virtual Number) where
callers should be routed when they cannot be routed automatically.
•
Press [
save
].
•
Press [
next
]. The current ALT (Alternate) Mode - Answer Position for the selected tenant group
displays.
•
Press [
chg
] (change) to enter a new destination for the ALT Mode for this tenant group.
•
Enter the appropriate DX-80 system directory number (extension, UCD group, Virtual Number) where
callers should be routed when they cannot be routed automatically.
•
Press [
save
].
•
Press [
next
]. The current EVE (Evening) Mode - Answer Position for the selected tenant group
displays.
•
Press [
chg
] (change) to enter a new destination for the EVE Mode for this tenant group.
•
Enter the appropriate DX-80 system directory number (extension, UCD group, Virtual Number) where
callers should be routed when they cannot be routed automatically.
•
Press [
save
].
•
Press [
next
]. The DX-80 system prompts for changes to another tenant group if necessary. If so, enter
that group number and follow the previous steps to complete programming for the selected tenant
group. Otherwise press to return to the previous programming level (Answer Position).
Содержание DX-80
