Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 134 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-84
3. Input the password (default for Tenant 1 is “9999”), then press [
show
]. The system shows
SVC MODE
CHANGE
in the display.
4. Press [
show
]. The current mode of operation displays.
5. Press [
chg
] until the appropriate mode displays.
6. Lift and replace the handset or press the ON/OFF button twice to exit Attendant Administration.
Conditions
a) This function can only be operated at the attendant extension.
b) The feature access code can be assigned to an available Flexible Feature Button at the attendant extension
with the Attendant Extension Password to allow one button operation.
!63
+
9999
.
c) The display of all digital telephones will indicate the current Ringing Mode of operation. The prompts
EVE
and
ALT
above the center LCD Interactive button indicate these active modes. The DAY mode is indicated
by the absence of the other indicators.
Default Settings
CO Line – Answering Position – Day and Eve = 101.
(Range is 101~156, 410~433, 700~729.)
System Application – Time Switching (See Automatic CO Line Ringing Modes.)
Programming Abstract
Program each CO Line for the ringing position(s) (Answering Positions) required.
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
], [
chg
], [
bksp
], and [
save
] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
!+*
and then enter the DB Admin password
“
++++++++
.” (Note: This eight-character password can be changed.)
•
Press [
show
]. The DB Item Select screen displays.
Program Day Mode Answering Positions (02-740~755-13-01-01):
•
Input 02-ccc-13-01-01 (“ccc” is the CO Line directory number), then press [save]. The Day mode Member 1
Answering Position displays.
•
To change this member press [
chg
].
Or…
•
To advance to the nest member press [
next
].
•
Press [
chg
] to change the stored member (ringing/answering position).
•
Input the directory number for the ringing position (extension, 101-156; UCD, 410-433; or Virtual number,
700-730.)
•
Press [
save
] to store this data.
•
Continue making other changes or exit programming.
Program Eve Mode Answering Position (02-740~755-13-02):
•
Input 02-ccc-13-02 (“ccc” is the CO Line directory number), then press [
save
]. The Eve mode Answering
Position displays.
•
Press [
chg
] to change the stored answering position (ringing/answering position).