Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 257 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-207
•
Press [
chg
] until the appropriate Port Type displays.
Or...
•
Press
the Volume button (up or down)
to return to the DB Item Select screen and input 01-101~156-21
for the next extension to program.
•
Repeat the above steps for all extensions to be programmed as Port Type “V.A.”
•
Press
the Hold button
to return to the previous menu level or press
the Volume button (up or down)
to
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
«
.
•
Use
¢£¤¥
to highlight “Extension” and then press
«
.
•
Use
¢£¤¥
to highlight “Category 2” and then press
«
.
•
Use
¢£¤¥
and
³´
to highlight “Port Type” or the extension number to program.
•
Press
«
until the appropriate Port Type displays.
•
Continue making other programming changes as required.
•
When all changes are made press the
°
(escape) key to exit this database-programming screen. You will
see the prompt: “ Exit This Feature ”; press “ Y ” for yes.
•
You will then be prompted to “ Save Current Setting ?”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” to save changes.
•
If you press “ Y ” (yes), you will then be prompted “ File Exists, Override? ”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” (yes) to continue with the save operation.
•
Press
°
(escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “ SEND ” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Release Key
!52
A digital speakerphone user may want a Release Key that will act to cancel or complete any current action. The
Release Key function can speed call processing by allowing the user to eliminate the use of the hook-switch when
call processing is encumbered by this operation.
The Release Key can be used to complete a call transfer (rather than going back on-hook). It can also be used to
force the telephone into an idle mode regardless of the condition of the hook-switch.
Related Features
Flexible Feature Button Programming