Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 270 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-220
To program SPD No. Assignment (allocation):
•
Use
¢£¤¥
to highlight “SPD No. Assignment” and then press
«
.
•
To allocate speed numbers in the System List:
•
Use
¢£¤¥
to highlight “System List” and then press
«
.
•
Use
¢£¤¥
to highlight the Tenant Group speed dial allocation under either the Increase or
Decrease column.
•
Press
«
to increment the selected Tenant Group speed number allocation. Each time that enter is
pressed allocation is incremented by 50.
•
When all changes are made press the ESC (escape) key to exit this database-programming screen.
You will see the prompt: “Exit This Feature”; press “
Y ” for yes.
•
You will then be prompted to “Save Current Setting?”
Ø Press “ N ” to abort changes and leave all data unchanged.
Ø Press “ Y ” to save changes.
•
If you press “ Y ” (yes), you will then be prompted “File Exists, Override?”
Ø Press “ N ” to abort changes and leave all data unchanged.
Ø Press “ Y ” (yes) to continue with the save operation.
•
To allocate speed numbers in the Individual List:
•
Use the cursor arrows to highlight “Individual List” and then press
«
.
•
Use the cursor arrows to highlight the extension speed dial allocation under either the Increase or
Decrease column. (Use the
³
or
´
buttons to select extensions not viewed on this screen.)
•
Press
«
to increment the selected Tenant Group speed number allocation. Each time that enter is
pressed allocation is incremented by 10.
•
When all changes are made press the ESC (escape) key to exit this database-programming screen.
You will see the prompt: “Exit This Feature”; press “
Y ” for yes.
•
You will then be prompted to “Save Current Setting?”
Ø Press “ N ” to abort changes and leave all data unchanged.
Ø Press “ Y ” to save changes.
•
If you press “ Y ” (yes), you will then be prompted “File Exists, Override?”
Ø Press “ N ” to abort changes and leave all data unchanged.
Ø Press “ Y ” (yes) to continue with the save operation.
To program SPD Numbers:
Note: Both System and Individual Speed numbers can be programmed via PC-DBA.
•
Use
¢£¤¥
to highlight SPD No. Programming then press
«
.
To program System SPD Numbers:
•
Use
¢£¤¥
to highlight System SPD No. then press
«
.
•
Use
¢£¤¥
to highlight the Tenant Group for which changes are to be made, then press
«
.
•
Use
¢£¤¥
and the
³´
buttons to select the System Speed Dial number to change.
•
Press
«
.
•
Input the new telephone number with special characters as required.
Pause = “ P ”
Flash = “ / ” (forward slash button)
Speed Numbering Chaining = “ @ ” + next speed number (500-699).
•
Press
«
.