manualshive.com logo in svg

Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 220 / 352

Поделиться
Скачать
Comdial DX-80 Скачать руководство пользователя страница 220

DX-80 I

NSTALLATION AND 

M

AINTENANCE 

M

ANUAL

P7290 IMM

3-170

2.  You can:

a.  Lift the handset to speak confidentially with the calling extension.
b.  Press the Mute button to deactivate the Mute feature and speak with the calling extension hands-free.

(Using speakerphone mode.)

Operation – Receiving a Call in Tone Mode

1.  When your extension is idle, an intercom call to your extension will alert you of the call with a double-burst

tone which is repeated until you respond or until the call follows a Call Forward route.

2.  You can:

a.  Lift the handset to speak confidentially with the calling extension.
b.  Press the 

On/Off

 button to activate the speakerphone and speak with the calling extension hands-free.

Conditions

a)  Intercom calls to Digital Speakerphones selected for Voice Announce - Hands-free or Voice Announce -

Private are “logically” answered by the system at the called extension.

b)  During Tone Ring, the red LED associated with the 

On/Off

 button will flash.

c)  If a Flexible Feature Button has been programmed with the Intercom Mode Selection Code (

!98

)

the LED associated to that button will indicate the current mode selection as follows:

•

 

Voice Announce – Hands-free, LED will light steady green.

•

 

Voice Announce – Privacy, LED will light steady red.

•

 

Tone Ringing Mode, LED will not light

Default Setting

All digital speakerphones are set to Voice Announce – Hands-free Reply mode.

Intrusion - Extension/CO Line

Intrusion allows the initiator to enter into an existing conversation when the initiator has been given the privilege to do
so via Extension programming (“Intrusion Active” = Y). This feature can be very effective for service observing and
any time that forcedly entering into a conversation on a CO Line or at another extension may be required.

Intrusion can be invoked both on a busy CO Line and to a busy extension.

Related Features

Monitor - Extension Via Monitor COS

Related Programming

Extension - Intrusion Active, Intrusion Accept, Intrusion Tone

Operation

1.  Press the busy CO Line button or dial a busy extension number.

Call to a busy extension, the display will show:

EXT XXX    BUSY

cbck msg  next

Press [

next

].

camp voic intru

Access a busy CO Line, the display will show:

CO LN BUSY  XXX

cbck      intru

2.  Press [

intru

]. You are joined into the existing conversation.

Содержание DX-80

































































































































































































































































































































































Отзывы:

Нет отзывов