manualshive.com logo in svg

Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 324 / 352

Поделиться
Скачать
Comdial DX-80 Скачать руководство пользователя страница 324

DX-80 I

NSTALLATION AND 

M

AINTENANCE 

M

ANUAL

P7290 IMM

4-8

•

 

Press any key (as requested). The Main screen is then displayed with the cursor positioned on “PC-DBA”.

 +-------------------+
 ¦       Main        ¦
 +-------------------¦
 ¦  PC-DBA           ¦
 ¦  Database Save    ¦
 ¦  Database Restore ¦
 ¦  Exit to DOS      ¦
 +-------------------+

•

 

Enter into the Programming and Maintenance functions of PC-DBA by pressing 

«

. The PC-DBA screen

is now shown with the cursor positioned on “Programming.”

 +--------------------+
 ¦      PC-DBA        ¦
 +--------------------¦
 ¦    Programming     ¦
 ¦    Maintenance     ¦
 +--------------------+

•

 

Use 

¢£¤¥

 to select Maintenance and then press 

«

 

to enter into the Maintenance screen. The

Maintenance screen is shown with the cursor positioned on “Configuration”.

 +--------------------------+
 ¦       Maintenance        ¦
 +--------------------------¦
 ¦     Configuration        ¦
 ¦     Diagnostics          ¦
 ¦     Status               ¦
 ¦     SW/HW Revision       ¦
 ¦     Event                ¦
 ¦     Logon Data           ¦
 ¦     Remote Control       ¦
 +--------------------------+

All operations in PC-DBA – Maintenance require a data communications connection with the DX-80
system to be interrogated. This can be done in two ways; via direct connection to the KSU1 – CPM – PC-
DBA port or via the optional system modem (PN 7249). Once a data communications link has been
established, F5-Cnt (Connect) is possible. This 

connect

 operation links PC-DBA to the DX-80 processor

for data exchange.

Cable

Connection to the DX-80 system on site is accomplished via the PC serial port (COM Port). Use a

straight-through, 9-pin to 9-pin, Male/Female 

cable from the PC serial port to the DX-80 CPM – PC-DBA

Port. Once this connection is made, it is possible to connect to the DX-80 system processor for the
various Maintenance operations.

Modem

See F9-Modem below. This connection method can be used while off-site.

Содержание DX-80

































































































































































































































































































































































Отзывы:

Нет отзывов