
DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-28
b) Outgoing call recording begins after the Call Duration Timer has expired.
c) Placing a call on hold constitutes completing a call and ends the recording function. If the recorded
conversation prior to pressing hold is to be kept, the Voice Record button must be pressed prior to pressing
Hold.
d) Auto Record and Voice Record occupy one voice channel on the DX-80 Voice Mail system during the record
operation. This resource consuming function should be deployed with careful consideration of the total
available voice mail channels and the overall impact on other voice mail/auto attendant related functions.
e) Only eight (8) digital speakerphones may be assigned for use with the Auto Record feature.
Default Setting
Auto Record is disabled at default for all extensions.
Programming Abstract
•
Program the extension(s) to be used with Automatic Record for Record Allow.
•
Program the extension(s) to be used with Automatic Record as Auto Record Member(s).
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
],
[
chg
], [
bksp
], and [
save
] are interactive LCD button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
!#*
and then enter the DB Admin password
“
########
.” (Note: This eight-character password can be changed.)
•
Press [
show
]. The DB Item Select screen displays.
•
Input
01-101~156-20 (101~156 = extension)
to program Record Allow for the selected extension.
•
Press [
save
]. The display will show the current setting for Record Allow for this extension.
•
Press [
chg
] (change) to select Y/N (yes/no). Yes will set this extension as a Record Allow extension.
•
Press the
Volume
button (up or down) to return the index entry to program another extension
01-101~156-
20
or...
•
Exit the programming mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«
. The program title page displays.
•
Press any key at the program title page to enter the Main Menu.
•
Select PC-DBA from the Main Menu. The PC-DBA menu is then shown.
•
Select Programming from the PC-DBA menu.
Program the extension(s) for Record Allow:
•
Use
¢£¤¥
to highlight “Extension” and then press
«
.
•
Use
¢£¤¥
to highlight “Category 3” and then press
«
.
•
Use the
³´
(Page Up/Page Down) buttons on the PC keyboard until the extension number you wish to
program can be seen under the “DIR#” column.
•
Use
¢£¤¥
to highlight the “Y/N” database item under the Record Allow column for the extension to
be programmed. (As you move the cursor it can be positioned horizontally in association with the extension
number under the vertical “Record Allow” column.
•
Press
«
to change the value of the database item (Y/N).
•
Continue programming all those database items where changes are required.
Содержание DX-80
