Comdial DX-80 Скачать руководство пользователя страница 333 | Manualshive

Страница: 333 / 352

Comdial DX-80 Скачать руководство пользователя страница 333

DX-80 I

NSTALLATION AND

M

AINTENANCE

M

ANUAL

P7290 IMM

4-17

Diagnostics

The Diagnostics function can be invoked to force a diagnostic test operation. The system performs this
test automatically at the time it boots up (initial installation) and whenever programmed to do so. (See
Database Administration – via PC-DBA – System Application – Category 1 – Self-Test Time.) At default
(factory settings), the system Self-Test Time is set to “NULL” (never performed).

The Diagnostic Self-Test can be invoked Automatically (as above) or Manually.

When the Diagnostic Self-Test is invoked, the DX-80 will perform a list of software and hardware checks
to assure proper operation of the hardware installed.

Diagnostic Test activity has the lowest priority in CPU processing tasks. Therefore the time required to
complete this testing operation could vary from one test to the next. When an automatic test or manual test
of the entire system is invoked, the testing time will be approximately 30 minutes.

Manual Diagnostics testing can be invoked for the entire system or for one module or module port.

+--------------------+
¦ Diagnostics ¦
+--------------------¦
¦ Self Test ¦
¦ Test Report ¦
+--------------------+

When the Diagnostic option “Self Test” is selected, you are prompted to Wait For the Result or Don’t Wait.

+--------------------+
¦ Self Test ¦
+--------------------¦
¦ Wait for Result ¦
¦ Don’t Wait ¦
+--------------------+

When invoking the test for the entire system, it is recommended not to wait for the result since this will
take several minutes and force PC-DBA to wait for the diagnostic report. (While waiting, it is not possible
to perform any other PC-DBA functions.)

When the Test Report option is selected, the DX-80 will deliver the last Diagnostics test report to PC-DBA.

Screens and notes of the information included in this report are shown on the following pages:

«
...
331
332
333
334
335
...
»

Содержание DX-80

































































































































































































































































































































































Отзывы:

Нет отзывов