Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 232 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-182
Operation – Deactivate
1. The extension must be idle.
2. Press
!*90
. The display shows:
STATUS MSG DEL
3. The telephone returns to idle.
Conditions
a) Dial Pad Key 1 is used to select special characters. Refer to the Letter Scheme feature
b) Dial
*
before any dial pad key to insert the numeral on the dial pad key instead of a letter in this character
position.
c) When
*
is pressed after a letter has been selected for this character position, the selected letter is forced
to lower case.
d) Use
/
to insert a space.
e) Use
/
to advance to the next character position.
f) Messages can be 16 letters/symbols maximum.
g) The Message – Status feature code can be stored on an available Flexible Feature Button.
h) When the Message – Status feature code is stored on a Flexible Feature Button, that button is used to
activate and deactivate the status message.
Default Settings
System Resource – Preprogrammed Message – Premises Message 1 = “Out to lunch”
System Resource – Preprogrammed Message – Premises Message 2 = “Will return soon”
System Resource – Preprogrammed Message – Premises Message 3 = “Gone for the day”
System Resource – Preprogrammed Message – Premises Message 4 = “In a meeting”
System Resource – Preprogrammed Message – Premises Message 5 = “Out of office”
System Resource – Preprogrammed Message – Premises Message 6 = “On vacation”
Programming Abstract
Change the content of preprogrammed messages as necessary.
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
], [
chg
], [
bksp
], and [
save
] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
!+*
and then enter the DB Admin password
“
++++++++
.” (Note: This eight-character password can be changed.)
•
Press [
show
]. The DB Item Select screen displays.
•
Input 04-07-02-01 , then press [
save
]. This advances to Preprogrammed Messages – Premises (Status)
Message – 1.
•
Press [
next
] (if necessary) to advance to the next preprogrammed message to change.
•
Press [
chg
] to input a new message for the selected preprogrammed message.
•
Use the chart and the dial pad keys to input the new message. When finished press [
save
].
•
Continue programming messages as required.
•
Press
the Hold button
to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.