Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 131 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-81
•
Press [
save
]. The data is stored.
•
To program other Members press [
next
] or [
back
] to select the Member to change and repeat the process.
•
Continue making other programming changes or exit the programming mode.
Program CO Lines for the Evening Ring Assignment (02-ccc-13-02):
•
Input 02-ccc-13-02 (where “ccc” = the CO Line directory number 740-755 to be programmed). The first of
six possible Members (destinations) displays.
•
Press [
chg
] to change the Evening assignment.
•
Input the directory number where Evening mode ringing for this CO line is necessary. (Extensions: 101-156;
Hunt Groups: 410-433; Virtual Numbers 700-729.)
•
Press [
save
]. The data is stored.
•
Continue making other programming changes or exit the programming mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
«
.
•
Use
¢£¤¥
to highlight “CO Line.” Then press
«
.
•
Use
¢£¤¥
to highlight “Answering Position.” Then press
«
.
•
Use
¢£¤¥
to highlight the Day Member or Evening ringing destination for the CO Line (CO Line
numbers are listed vertically along the left side of the screen). Then press
«
.
•
Input the CO Line, Hunt Group or Virtual Number directory number where ringing for this CO Line is to be
assigned.
•
Press
«
. The database item is temporarily stored.
•
Use
¢£¤¥
to highlight the next ringing destination to be programmed.
•
Repeat the programming process for all CO Lines and destinations for the mode (Day/Evening).
•
When you have completed all changes, press the
°
(escape) key to exit this database programming
screen. You will see the prompt: “ Exit This Feature ”; press “ Y ” for yes.
•
You will then be prompted to “ Save Current Setting ?”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” to save changes.
•
If you press “ Y ” (yes), you will then be prompted “ File Exists, Override? ”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” (yes) to continue with the save operation.
•
Press
°
(escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.