Comdial DX-80 Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 352

Comdial DX-80 Скачать руководство пользователя страница 86

DX-80 I

NSTALLATION AND

M

AINTENANCE

M

ANUAL

P7290 IMM

3-36

Related Programming

CO Line - Call Abandon, Route, and Answering Position
Call Handling - XFER_B Recall

Operation – Setup

To deny Busy Ring:

Press

!,2

Confirmation tone will be heard, and the display will read:

BUSY RING DENY

To allow Busy Ring:

Press

!,2

Confirmation tone will be heard and the display will read:

BUSY RING ALLOW

Conditions

This feature may be programmed (F#3) under a flexible button on the Digital Speakerphone. No LED’s will
be in use and the button can be depressed and toggled to allow/deny this feature.

Call Operator / Attendant

0

The extension that is programmed as the Attendant may receive multiple internal calls via the programmed Operator
Code. The Operator Code is “0” at default.

Related Features

Flexible Numbering Plan

Tenant Group

Related Programming

System Application - Operator Code
System Resource - Attendant

Default Settings

System Application – Numbering Plan – Operator Code – “Length” is set to 1 (one).
System Application – Numbering Plan – Operator Code – “Leading” is set to 0 (zero).
System Resource – Attendant – Tenant Group “1” is set to extension 101.
System Resource – Attendant – Tenant Group “2,” and “3” is set to Null (none).
System Resource – Attendant – Alternate - Tenant Group “1,””2,” and “3” is set to Null.

Conditions

a) The Operator Code is in addition to the default assigned three-digit intercom number for the extension.
b) The attendant three-digit extension number can be assigned to any feature button.

Programming Abstract

•

Program the Operator Code Length if the necessary code should be longer than one digit.

•

Program the Operator Code if the length is changed or some other digit is necessary to reach the system
attendant.

«
...
84
85
86
87
88
...
»

Содержание DX-80

































































































































































































































































































































































Отзывы:

Нет отзывов