Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 266 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-216
Speakerphone
Digital telephones of the DX-80 system are all equipped with a high-quality, half-duplex speakerphone. This feature
makes it possible to place hands-free (conference room style) calls from any digital DX-80 telephone.
Related Features
CO Line calling Intercom calling
Operation – Placing a Call
1. Press an idle CO Line button or dial an intercom number (see Condition c.)
2. The
On/Off
button LED immediately lights and the speakerphone is active.
3. Press
the On/Off button
to hang up the call. (Or lift the handset to convert the call from a hands-free
speakerphone connection to a private handset connection.)
Operation – Answering a Call
1. While your digital phone is ringing, press the
On/Off
button.
2. The
On/Off
button LED immediately lights and the speakerphone is active.
3. Press
the On/Off button
to hang up the call. (Or lift the handset to convert the call from a hands-free
speakerphone connection to a private handset connection.)
Conditions
a) The speakerphone function is impacted by environmental conditions.
b) Operation of the speakerphone in high-noise areas may yield less than adequate results. If this is the case
in the area where your telephone is located, the handset may be used to improve connection conditions.
c) To dial intercom numbers directly from an idle condition, the Hot Key setting must be Enabled. Otherwise,
the extension user must press a programmed Intercom Button or press the On/Off button prior to dialing the
extension number.
Speed Dial – Extension/System
Speed Dialing allows you to store frequently dialed numbers. These numbers are accessed for dialing by the
associated speed dial directory number (Speed Number Location). The directory number may be stored on any
feature button for instant one-button operation.
Extensions may store up to fifty (50) personal (extension) speed numbers in memory. (At default 20 personal
locations – numbered 470-489 are available for extensions 101-140). There are also two hundred (200) Speed Dial
bins allocated for system-wide use (locations 500-699). System Speed Dial is programmed via Attendant
Administration or via customer database programming.
You may choose to first press an idle CO line or you may let the system automatically select the line.
The DX-80 system can be programmed to allow System Speed Dial Numbers to override Toll Restriction settings
(both CO Line and Extension COS).
Related Features
Class of Service – Extension Pulse to DTMF Conversion
Toll Restriction Attendant Administration
Flexible System numbering Plan Tenant Groups
Flash Pause
Related Programming
System Resource - Speed Number Assignment, Speed Number Programming
Call Handling - Dial Wait Time, Dial Delay Time, System Speed Toll Check