manualshive.com logo in svg

Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 204 / 352

Поделиться
Скачать
Comdial DX-80 Скачать руководство пользователя страница 204

DX-80 I

NSTALLATION AND 

M

AINTENANCE 

M

ANUAL

P7290 IMM

3-154

Operation – Activate Headset Mode

While the telephone is idle, press 

!9/

 or press the Flexible Feature button programmed with the

Headset Mode code. The display indicates the new status:

HEADSET ENABLED

Operation – Deactivate Headset Mode

While the telephone is idle, press 

!*9/

 or press the Flexible Feature button programmed with

the Headset Mode code. The display indicates the new status:

HEADSET DISABLED

Operation – Use the Headset to Place a Call

1.  While the telephone is idle, press

 the On/Off button

, a DSS button or CO Line button. The 

On/Off

 button

LED flashes to indicate that the headset is active.

2.  Intercom Dial Tone, CO Line dial tone or Intercom ring-back tone is heard depending on the function

invoked.

3.  Press 

the On/Off button

 again to disconnect the current call.

Operation – Use the Headset to Answer a Call

1.  While the telephone is ringing, press

 the On/Off button

. The 

On/Off

 button LED flashes to indicate that the

headset is active.

2.  The ringing call is answered and connected to the headset.

3.  Press 

the On/Off button

 again to disconnect the current call.

Conditions

a)  You may assign a feature button with the Headset feature code and use the button to turn the headset on

and off. When the headset is enabled that button will light.

b)  While using the headset, you may pick up Intercom Voice calls by pressing

 the On/Off button

.

c)  Incoming CO line calls may be answered by pressing 

the On/Off

 button (for automatic priority ring

selection) or by pressing the specific CO line button.

d)  Other features like background music and muted ring continue to operate in the same manner while you are

on-hook.

e)  Non-amplified headsets may be powered directly from the key telephone. In most cases this interface

permits the key telephone to control the Volume Up/Down and Mute features. Some headsets may require
the use of the headset adapter keys to adjust the volume, mute and other headset functions.

f) 

Pressing 

the On/Off button

 will disconnect calls when the Headset mode is active.

Hidden Codes

!61

A four-digit code may be stored for dialing by one-button operation. The Hidden Code feature is reserved to use with
a Flexible Feature button. (It must be stored on a Flexible Feature button to operate.) This feature is typically used
with voice mail systems (both internal and external). When the voice mail mailbox is reached, the Hidden Code button
can be pressed to dial the stored code.

Related Features

Integrated Voice Mail

Flexible Feature Button Programming

Содержание DX-80

































































































































































































































































































































































Отзывы:

Нет отзывов