Comdial DX-80 Скачать руководство пользователя страница 90

Страница: 90 / 352

DX-80 I

NSTALLATION AND

AINTENANCE

ANUAL

P7290 IMM

3-40

Conditions

a) If you press [

del

] during the Call Back Alert ringing, the Call Back will be cancelled and the LCD will

display:

CBCK DELETE XXX

Your extension will return to an idle status.

b) To invoke a Call Back at an extension that is in the Voice Announce mode, you must first Force Tone

Ringing (

c) If the Call Back is not answered during the reply alert ringing, the response message will be displayed until

you press either [

], or [

del

d) The Call Back process begins when both your extension and the called party’s extension are in an idle, on-

hook mode.

Call Back – CO Line

[

cbck

]

This feature allows you to queue a busy CO line and reserve that CO line for use when it becomes available. This

feature eliminates the need for you to continually observe the line status for availability. You may only have one Call
Back active at any time.

Related Features

Call Back – Cancel All ( F##)

Related Programming

CO Line Assignment

Operation

1. Press a busy (solid Red LED) CO Line or CO Line group button, or dial a CO Line access group number (9,

800-806, 740~755). While the busy tone sounds, the display will read:

CO LN BUSY XXX

2. Press [

cbck

] Interactive Soft Button or Dial [#] on the dial pad.

Confirmation tone will be heard and the display will read:

CBCK TO LINE XXX

A few moments later, the display will return to an idle state.

When the selected CO Line, or a CO Line in the selected CO Line group becomes available, fast ringing will

be heard at the extension and the display will read:

CBCK TO LINE XXX

reply del

3. Press [

] to be connected to available CO Line, and dial the appropriate number or

4. Press [

del

] to delete the CO Line callback if necessary.

To Cancel all Active Call Backs Prior to Receiving Call Back Alert Ringing:

Press

!,,

Analog Ports (Single Line Telephones)

When you try to access a CO Line and get a busy tone, dial

Содержание DX-80

































































































































































































































































































































































Результаты поиска

Содержание DX-80

Отзывы:

Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 90 / 352

Результаты поиска

Содержание DX-80

Отзывы: