Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 52 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-2
Extension Classes of service - all calls allowed
Account Code Access Code - 79
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
], [
chg
], [
bksp
], and [
save
] are interactive LCD button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
! *
and then enter the DB Admin password
“
########
.” (Note: This eight-character password can be changed.)
•
Press [
show
]. The DB Item Select screen displays.
•
Input 05-02.
•
Press [
save
].
•
Press [
show
]. The Account Code database item “LENGTH” displays.
•
Press [
chg
] (change) until the appropriate account code length displays.
•
Enter the new length and then press [
save
].
•
Press [
next
]. The account code database item “PASSWORD” displays.
•
Press [
show
]. The ID Number of the account code to be changed is required.
•
Enter the account code number 001-600 to change/display.
•
Press [
show
]. The existing programming displays. (“NULL” = empty.)
•
Press [
chg
].
•
Enter the account code using the digits 0-9 on the dial pad. When the correct number of digits are entered
(according to the designated length), press “save.” This database item is then updated.
•
Press [
next
]. The Class of Service for this account code displays.
•
Press [
chg
] until the appropriate Class displays for this account code password.
•
Press [
next
]. The item “DISABLED” displays. This setting is used temporarily disable the use of a particular
Account Code without removing its programming. “DISABLED” means that this account code is active.
•
Press [
chg
] to select “ Y ” or “ N ” to disable this account code password.
•
Press [
next
] to continue programming other account codes. Or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«
. The program title page displays.
•
Press any key at the program title page to enter the Main Menu.
•
Select PC-DBA from the Main Menu. The PC-DBA menu is then shown.
•
Select Programming from the PC-DBA menu.
•
Use
¢£¤¥
to highlight “RESTRICTION” and then press
«
.
•
Use
¢£¤¥
to highlight “Account Code Table” and then press
«
. The cursor is now positioned on
the database item - account code “LENGTH.”
•
Press
«
to change this item. Or move the cursor to another item. Note: Changing the account code length
will delete all previously programmed account codes!
•
Move the cursor as required to the database item to be changed.