Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 205 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-155
Operation – Storing the Code
1. While the telephone is idle, access Flexible Feature Button Programming (
!/3
) then press the
feature button to be stored with your Hidden Code.
AVAILABLE KEY
chg
2. Press [
chg
].
SELECT FUNCTION
dir feat
3. Press [
feat
].
FTR CODE:_
bksp save chg
4. Press
!61
+ {the four-digit code to store}.
5. Press [
save
].
6. Exit Flexible Feature Button Programming.
Operation – Using the Hidden Code
1. Access the voice mail system (either the DX-80 Voice or an external voice mail system).
2. When you hear the prompt to enter your password, press the Hidden Code button.
Conditions
The Hidden Code feature can only be used when stored on a Flexible Feature button.
Hold – Common (System) & I-Hold Indication
You may place any CO line on System Hold by pressing the
Hold
button. When you place a line on System Hold,
the green lamp for that line will flash at the I-Hold rate. This system-hold line will flash the red lamp at all other
extensions.
I-Hold Indication allows you to easily distinguish between a call you placed on hold at your telephone and calls placed
on hold at other telephones. When you place a call on System Hold, the associated line lamp will flash at the System
Hold rate using the green lamp to indicate that this is your holding line. The same held CO line at other extensions
will flash at the System Hold rate using the red lamp.
Related Features
Call Transfer Hold Reminder
Hold Abandon
Related Programming
Call Handling - Hold Recall, Hold Reminder, Ex_Hold Time
Operation
1. While on a line, the green lamp for that line is I-Use flashing (double wink rate).
2. Press
the Hold button
. The green lamp now flashes at a slow rate and the call is placed on System Hold.
Analog Ports (Single Line Telephones)
1. While on a line, press {FLASH} (hook-switch flash).
2. Hang up. The line is placed on System Hold.