Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 303 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-253
Conditions
a) When transferring a call to voice mail, you may choose to enter no mailbox number. Doing so, will route the
caller to the voice mail main greeting (e.g., Auto Attendant greeting).
b) If no voice mail ports are available at the time you place your call into voice mail, you will hear ring-back tone
until a port is available.
c) Voice mail feature operation is limited only by the ancillary voice mail system.
d) When voice mail ports are used heavily (high call traffic), messages indications will update notably slower
than usual.
e) When VM messages are waiting, the Auxiliary Lamp will flash green.
f) The voice mail code
!64
can be programmed on any available Flexible Feature Button.
g) When the voice mail code is programmed on a Feature Button, the associated LED will flash red when VM
messages are waiting.
h) The voice mail UCD Group directory number (usually
433
) can be programmed on any available
Flexible Feature Button.
Programming Abstract
•
Program those analog ports (extensions) as Port Type “VM.”
•
Program analog ports (1…8) connected to the ancillary voice mail system into one of the available UCD
Groups, “Members” positions (UCD Group 24 is usually used for this purpose).
•
Set the Voice Mail Table to reference the UCD Group to be used for the Voice Mail ports.
•
Program the various Voice Mail call handling control digits into the voice mail table. (The DX-80 allows for
specific control handling for various call types. For example, calls that recall to VM can be handled in a
unique manner.)
Note: This programming must coincide with the programming of the ancillary voice mail device for the
various functions to operate. Ancillary voice mail programming is outside the scope of this manual.
•
Set the Voice Mail Dialing Ratio for suitable DTMF operation. (If required.)
•
To activate Automated Attendant, set Answering Position to the UCD Group directory number coinciding
with voice mail. (Usually “433” {UCD Group 24}.) See CO Line Ring Assignment.
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
], [
chg
], [
bksp
], and [
save
] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
!+*
and then enter the DB Admin password
“
++++++++
.” (Note: This eight-character password can be changed.)
•
Press [
show
]. The DB Item Select screen displays.
•
Input the code to go to the specific database item to change per the list:
01-101~156-21 (Extension “Port Type” where 101~156 is the analog port)
•
Press [
save
]
•
Press [
chg
] until the port type “VM” displays for this extension.
•
Press the Hold button to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
06-01-01~24-03-01 (UCD Group “Members” where 01~24 is the group number.)
•
Press [
save
]. This advances to Member #1 of the UCD Group selected.
•
Press [
chg
].
•
Input the extension directory of the analog port to program into this Member.
•
Press [
save
].