Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 167 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-117
Related Programming
Extension – Port Type
System Application – Numbering Plan – External Pager
Call Handling – VM Dialing Ratio – Tone Time
Call Handling – VM Dialing Ratio – Inter Digit Time
Operation
When intercom calls are made to either an External Page Port or a Voice Mail System, digits dialed on the
dial pad are sent to the connected device as DTMF tones.
Conditions
a) DTMF digits are only generated to extension ports of Type VM.
b) DTMF tone time and inter-digit time follows the programming of VM Dialing Ratio.
Default Setting
Call Handling – VM Dialing Ratio – Tone Time = 120. (Range is 60-150.)
Call Handling – VM Dialing Ratio – Inter Digit Time = 120. (Range is 60-150.)
Programming Abstract
•
Program Extension Port as required for VM operation – reference Voice Mail – Analog Integration.
•
Program dialing ratios as required by the ancillary devices.
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
], [
chg
], [
bksp
], and [
save
] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
!+*
and then enter the DB Admin password
“
++++++++
.” (Note: This eight-character password can be changed.)
•
Press [
show
]. The DB Item Select screen displays.
•
Input 03-33-01, then press [
save
]. The Tone Time displays.
•
Press [
chg
] until the appropriate Tone Time displays.
•
Press [
next
]. The Inter-Digit Time displays.
•
Press [
chg
] until the appropriate Inter-Digit Time displays.
•
Press
the Hold button
to return to the previous menu level or press
the Volume button (up or down)
to
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
«
.
•
Use
¢£¤¥
to highlight “Call Handling.” Then press
«
.
•
Use
¢£¤¥
to highlight “Category 3.” Then press
«
.
•
Use
¢£¤¥
to highlight “VM Dialing Ratio – Tone Time” or “Inter-Digit Time.”
•
Press until the appropriate time displays for the parameter.