manualshive.com logo in svg

Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 165 / 352

Поделиться
Скачать
Comdial DX-80 Скачать руководство пользователя страница 165

DX-80 I

NSTALLATION AND 

M

AINTENANCE 

M

ANUAL

P7290 IMM

3-115

Related Features

Do Not Disturb Override

Forced Intercom Call Forward

Do Not Disturb – One Time

Feature Button Disable

Related Programming

Extension – Feature Button Disable

Operation – Set Do Not Disturb (DND)

1.  While your telephone is idle (no other call activity) press 

!4

.

2.  Do Not Disturb is activated and the display momentarily displays:

DO NOT DISTURB

3.  When the display reverts back to idle condition the set condition is indicated in the bottom row of the display.

The idle extension in DND shows:

SEP 25 MON 10:25

EXT    DND  103

Analog Ports (Single Line Telephones)

1.  Dial 

#4

.

2.  Repeat to clear.

Operation – Cancel Do Not Disturb (DND)

1.  While your telephone is idle (no other call activity) press 

!4

.

2.  Do Not Disturb is deactivated and the display momentarily displays:

DND DELETE

3.  When the display reverts back to idle condition the “DND” is removed from the display.

Conditions

a)  Do Not Disturb cannot be enabled if you have activated Call Forward.
b)  At any time while your digital speakerphone is idle, you may immediately divert an incoming tone ringing

intercom call to the attendant by using the DND feature – Forced Intercom Call Forward.

c)  Any DSS/BLF button of your extension will flash when you activate DND.
d)  The DND feature code may be programmed on a programmable feature button.
e)  A feature button programmed for the DND code will light steady whenever DND is active

Do Not Disturb – One Time

!4

DND – One Time allows you to block CO Line ringing (Transfer or direct) while engage in the current call. The
advantage of DND –One Time is that you don’t have remember to deactivate DND, it will automatically disable at the
conclusion of the current call.

Related Features

Call Forward

Feature Button Disable

Intercom

Forced Intercom Call Forward

Related Programming

Extension – Feature Button Disable

Содержание DX-80

































































































































































































































































































































































Отзывы:

Нет отзывов