Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 126 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-76
Copy CO Line(s) via Group (many at a time) programming method. (08-11-02):
•
Input 08-11-02.
•
Press [
save
]. This advances to the Group CO Line Copy screen.
•
Press [
show
]. The system prompts for the CO Line that should be copied; “COPY FROM.”
•
Input the CO Line directory number of the CO Line that has been programmed for copying to other CO
Lines.
•
Press [
save
]. The system prompts for the CO Line Group directory number where the source data is to be
copied; “COPY TO.”
•
Input the CO Line Group directory number (9, 800-806) where the copy data should be stored.
•
Press [
save
]. The copy data is stored in all CO Lines that are part of that CO Line Group. At this time the
system prompts for the next CO Line Group directory number where the source data is to be copied; “COPY
TO” again.
•
Continue inputting CO Line Group directory numbers where the copy data should be stored.
•
Press [
save
] for each input directory number.
•
When finished programming CO Lines via the Group Copy function, press (volume up or down) to return to
the DB Item Select screen. Or… press HOLD to return to the previous database menu. Then use [
back
] or
[
next
] to skip to the appropriate database item.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
«
.
•
Use
¢£¤¥
to highlight “System Application.” Then press
«
.
•
Use
¢£¤¥
to highlight “CO Line Copy.” Then press
«
. The CO Copy menu displays.
Copy CO Line(s) via Individual (one at a time) programming method:
•
Use
¢£¤¥
to highlight “Individual.” Then press
«
. The cursor is immediately positioned on the
Source CO Line Directory number input.
•
Input the CO Line directory number of the CO Line that has been programmed for copying to other CO
Lines.
•
Press
«
. The cursor immediately moves to the Destination Directory number input area.
•
Input the CO Line directory number (740-755) where the copy data should be stored.
•
Press
«
. The cursor moves to the next input position allowing entry of the next CO Line Directory
Number. The previous entry remains displayed.
•
Continue inputting CO Line directory numbers for those CO Lines where the copy data should be
stored, pressing
«
after each input directory number.
•
When all CO Lines to be copied with the copy data have been input press the ESC (escape). At this
time it is possible to input another “Source” CO Line directory number and continue the process for
another CO Line(s).