Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 169 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-119
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
], [
chg
], [
bksp
], and [
save
] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
!+*
and then enter the DB Admin password
“
++++++++
.” (Note: This eight-character password can be changed.)
•
Press [
show
]. The DB Item Select screen displays.
•
Input 08-02 , then press [
save
]. This advances to the LETTER TYPE programming screen.
•
Press [
chg
] until the value for this data item displays.
•
Press the Hold button to exit DISA programming and return to the previous menu level.
•
Press the Volume button (up or down) to return to the DB Item Select screen.
•
Continue making other programming changes or exit the programming mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
«
.
•
Use
¢£¤¥
to highlight “System Application.” Then press
«
.
•
Use
¢£¤¥
to highlight “Category 1.” Then press
«
.
•
Use
¢£¤¥
to highlight “Letter Type.”
•
Press
«
.
Each time you press
«
, the value of this database item is updated. Use the table to determine
the specific Enhanced Letter Type for this application.
•
When you have completed all changes, press the
°
(escape) key to exit this database programming
screen. You will see the prompt: “ Exit This Feature ”; press “ Y ” for yes.
•
You will then be prompted to “ Save Current Setting ?”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” to save changes.
•
If you press “ Y ” (yes), you will then be prompted “ File Exists, Override? ”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” (yes) to continue with the save operation.
•
Press
°
(escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Extension Feature Status Check
!.8
The Digital Speakerphone user can quickly determine the status of all user-controlled features. This feature is useful
for the technician as well as the user since some feature conditions may not be evident if they are not programmed
on an available programmable feature button. The current status can be observed using the LCD interactive buttons.