Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 71 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-21
Conditions
a) Automatic CO Line Ringing time settings must be programmed in Time Switching and completely set for a
seven (7) day week for Automatic CO Line Ringing Modes to properly follow a automatic switching schedule.
b) The optional AAM must be installed for automated attendant to function.
Default Setting
No CO Lines are set for automated attendant operation.
The Answer Position is set to Extension “101” for DAY, ALT and EVE modes.
Ring Time to Answer is set at “0” seconds.
No Answer Time is set at “20” seconds.
Drop No digits Dialed is set to “No.”
XFR Mode set to RBT (Ring Back Tone).
Waiting Code set to “#.”
Inquiry Code set to “*.”
DISA Code set to “9.”
Programming Abstract
•
Set the system time and date to the correct local time and date (for Time mode operation).
•
Program the CO lines to be answered by the automated attendant and for the service modes that they
should be answered.
•
Program the various timers and settings. (See default list.)
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
], [
chg
], [
bksp
], and [
save
] are interactive LCD button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
!#*
and then enter the DB Admin password
“
########
.” (Note: This eight-character password can be changed.)
•
Press [
show
]. The DB Item Select screen displays.
•
Input 03-43 to program the Automated Attendant.
•
Press [
save
].
•
Press [
show
]. The first Auto Attendant database item (Ring Time To Answer) displays.
•
To change the Ring Time To Answer press [
chg
] (change). This timer sets the amount of time that a caller
will hear ring-back before the line is answered by the auto attendant.
•
Enter the new answer delay time from 0-20 seconds, then press [
save
].
•
Press [
next
]. The next database item (Ring No Answer) displays.
•
To change the Ring No Answer timer press [
chg
] (change). This timer sets the amount of time that a call
rings the auto attendant before being routed to the designated Answer Position in the event that all auto
attendant ports are in use and unavailable to handle the call. Each time the [
chg
] button is pressed the
value is updated to the next valid time interval. Valid times are 10-90 seconds in 10 second increments.
•
Press [
next
]. The next database item (Drop No Extension # Dialed) displays.
•
To change the Drop No Extension # dialed operation press [
chg
] (change). Each time that the [
chg
]
button is pressed the value changes (Y/N). When set to “Y” (yes), the caller will be automatically dropped by
the system if they do not make a selection or dial a valid extension directory number. When set to “N” (no), if
a caller does nothing he is routed to the designated Answering Position.
•
Press [
next
]. The next database item (“XFR” {Transfer} Mode) displays.
•
To change the XFR Mode press [chg] (change). Each time that the [
chg
] button is pressed the value
changes between the two available settings (Ring-Back Tone and Music On Hold), (RBT/MOH). This is the