Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 75 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-25
Programming Abstract
•
Set the Time and Date to the correct local time and date. (See System Time and Date.)
•
Set the system in “Time” mode. (See Attendant Administration.)
•
Program the various CO lines to ring at the appropriate Answering Positions in either Day Mode, Evening
Mode or both. (See CO Line Ring Assignment.)
•
Record the Auto Attendant (AAM only) for Alternate Mode Message is required. (See Automated Attendant.)
•
Program Time Switching times as appropriate. (See below.)
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
], [
chg
], [
bksp
], and [
save
] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
!+*
and then enter the DB Admin password
“
++++++++
.” (Note: This eight-character password can be changed.)
•
Press [
show
]. The DB Item Select screen displays.
•
Enter 08-15-1-02 to program Auto CO Line Ringing Modes - Time Switching for Tenant Group 1. (08-15-2-
02 for Tenant Group 2, 08-15-3-02 for Tenant Group 3)
•
Press [
save
]. The first day of the week (Sunday) displays.
•
If changes are necessary for this day press [
show
]; otherwise, press [
next
] until the day of the week for
which changes must be made displays. Then press [
show
].
•
The first time period for which the Service Mode may switch displays for the day selected; “ALT START”
(Alternate Start Time).
•
Press [
chg
] to change this data.
Or…
•
Press [
next
] to select the Service Mode for which a time schedule must be entered. (The data items that
can be changed are ALT START, ALT END, EVE START, EVE END.)
•
When the Service Mode to be changed displays press [
chg
] and input the new value in 24-hour format (e.g.,
1:00 PM is entered as 13:00).
•
Press [
save
] to store this data.
Or…
•
Enter 08-15-1-02-01 to program ALT START.
•
Enter 08-15-1-02-02 to program ALT END.
•
Enter 08-15-1-02-03 to program EVE START.
•
Enter 08-15-1-02-04 to program EVE END.
•
Continue programming as required.
•
Press the
Hold button
to return to the previous menu level or press the
Volume button (up or down)
to
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
«
.