
DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-9
Voice Mail is set to UCD Group 24 (directory number 433).
Programming Abstract
•
Change Monitor Time if required.
•
Program Predefined Call Forward for each extension if calls should always be directed to voice mail from
that extension.
Programming via the DET (Digital Extension Terminal)
Note: [
back
], [
next
], [
show
], [
chg
], [
bksp
], and [
save
] are interactive LCD button operations. Use the
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
!#*
and then enter the DB Admin password
“
########
.” (Note: This eight-character can be changed.)
•
Press [
show
]. The DB Item Select screen displays.
•
Input 03-34.
•
Press [
save
]. This advances to the VM Monitor_T screen.
•
Press [
chg
] (change) until the appropriate VM Monitor Time displays (in seconds.)
•
Press [
back
] or [
next
] for other programming. Or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu.
•
Use
¢£¤¥
to highlight “CALL HANDLING” and then press
«
.
•
Use
¢£¤¥
to highlight “Category 3, then press
«
. The cursor is now positioned on the database
item - “Dial Delay Time.”
•
Use
¢£¤¥
to highlight “VM Monitor Time” and then press
«
until you reach the appropriate play
time. (Range is 10-60 seconds.)
•
When you have completed all changes, press the
°
(escape) key to exit this database programming
screen. You will see the prompt: “
Exit This Feature
”; press “
Y
” for yes.
•
You will then be prompted to “
Save Current Setting
?”
•
Press “
N
” to abort changes and leave all data unchanged.
•
Press “
Y
” to save changes.
•
If you press “
Y
” (yes), you will then be prompted “
File Exists, Override?
”
•
Press “
N
” to abort changes and leave all data unchanged.
•
Press “
Y
” (yes) to continue with the save operation.
•
Press
°
(escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Содержание DX-80
