Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 116 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-66
Program extensions for CO Line Access. (01-101~156-23-01~16):
•
Enter 01-xxx-23-yy to program “xxx” Extension for “yy” CO Line access.
•
Press [
save
]. This advances to CO Line Access for extension “xxx” and CO “yy.”
•
Press [
chg
] until the appropriate value for this database item displays (Y/N).
•
Press
the Volume button
(up or down) to return to the DB Item Select screen and input another
extension and CO Line
Or…
•
Press [
back
] or [
next
] to select the previous or next sequential CO Line for the selected extension.
•
Press [
chg
] until the appropriate value for this database item displays.
•
When finished programming CO Line Access, press
the Volume button
(up or down) to return to the DB
Item Select screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
«
.
Program CO Line Access:
•
Use
¢£¤¥
to highlight “Extension.” Then press
«
.
•
Use
¢£¤¥
to highlight “Line Assignment.” Then press
«
. (Notice the display header “Extension –
[1/05].” The “[1/05],” indicates that this is the first of five pages for this database screen. Page 1 is extension
ports 1-14 (Extensions 101-114).)
•
Use the
³
and
´
buttons on the PC keyboard to select the page for the extension(s) to be programmed.
•
Use
¢£¤¥
to highlight the Line Assignment for the Extension. (CO Lines are listed along the top of
the display. Extensions are listed along the left side of the display.)
•
Press
«
until the appropriate value displays.
•
Continue making other programming changes as required.
•
When you have completed all changes, press the
°
(escape) key to exit this database programming
screen. You will see the prompt: “ Exit This Feature ”; press “ Y ” for yes.
•
You will then be prompted to “ Save Current Setting ?”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” to save changes.
•
If you press “ Y ” (yes), you will then be prompted “ File Exists, Override? ”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” (yes) to continue with the save operation.
•
Press
°
(escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.