Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 307 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-257
03-33-01 (VM Dialing Ratio – Tone Time)
•
Press [
save
]. This advances to Call Handling – VM Dialing Ratio – Tone Time.
•
Press [
chg
] until the appropriate Tone Time displays.
•
Press [
next
] to program Inter-Digit Time. Or…
•
Press
the Hold button
to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
03-33-01 (VM Dialing Ratio – Inter-Digit Time)
•
Press [
save
]. This advances to Call Handling – VM Dialing Ratio – Inter-Digit Time.
•
Press [
chg
] until the appropriate Inter-Digit Time displays.
•
Press
the Hold button
to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
«
.
Program Extension Port Type:
•
Use
¢£¤¥
to highlight “Extension.” Then press
«
.
•
Use
¢£¤¥
to highlight “Category 2.” Then press
«
.
•
Use
¢£¤¥
and
³´
to highlight “Port Type” for the analog extension connected to VM.
•
Press
«
until Port Type “VM” displays.
•
Use
¢£¤¥
and
³´
to highlight “Port Type” for the next analog extension to program.
•
Press
«
until Port Type “VM” displays.
•
Continue until all analog extensions connected to VM are programmed.
•
When all changes are made press the
°
(escape) key to exit this database programming screen. You will
see the prompt: “ Exit This Feature ”; press “ Y ” for yes.
•
You will then be prompted to “ Save Current Setting ?”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” to save changes.
•
If you press “ Y ” (yes), you will then be prompted “ File Exists, Override? ”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” (yes) to continue with the save operation.
•
Press
°
(escape) again to return to the Database Programming menu.
Program UCD Group Members:
•
Use
¢£¤¥
to highlight “Extension Application.” Then press
«
.
•
Use
¢£¤¥
to highlight “Uniform Call Distribution.” Then press
«
.