manualshive.com logo in svg

Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 326 / 352

Поделиться
Скачать
Comdial DX-80 Скачать руководство пользователя страница 326

DX-80 I

NSTALLATION AND 

M

AINTENANCE 

M

ANUAL

P7290 IMM

4-10

If successful, confirmation is given via the following screen:

+----------------------------+
¦          Connect           ¦
+----------------------------¦
¦           Succeed          ¦
¦       Press Any Key        ¦
+----------------------------+

Press any key to return to the PC-DBA Maintenance screens.

When a successful connection has been established between the DX-80 processor and the PC PC-DBA
software the following icon is displayed in the upper left corner of the PC-DBA screen.

[Cnt]

F6 – Disconnect

Disconnecting from the DX-80 processor

When a link is established between the DX-80 and PC-DBA, this link must also be broken when
Maintenance operations are complete. This breakdown of the connection will occur automatically if the
connection path (cable or modem connection) is interrupted or when PC-DBA is exited while the link is
active.

To force disconnect between the DX-80 processor and PC-DBA, press F6-Disconnect. This procedure
usually completes within a few seconds.

F7 – Print

At times a screen printout is desirable. This utility allows printing of each PC-DBA screen. Printout
requires that this screen be in use at the time F7 is pressed. F7-Print also requires that a printer be
connected to the PC Parallel port to operate. (Some other, third-party utility programs are available to
capture the output of the PC LPT (parallel) port to a file. These utilities can be very helpful for severe
trouble shooting analysis.)

F8 – Initialize

This is a function of PC-DBA – Programming only and is described in Database Administration – Via PC-
DBA.

F9 – Modem

Remote connection to the DX-80 system is possible via modem. The optional modem may be purchased
allowing remote administration of the DX-80 system database and Maintenance operations. The default
directory number of the modem is 199. Some working knowledge of modem operation and connection is
useful.

To establish a modem connection

Make sure that the attendant at the site location is aware that a modem connection will be taking place.
(Use of the automated attendant can greatly assist the modem connection process by removing the
human element at the site location.)

Содержание DX-80

































































































































































































































































































































































Отзывы:

Нет отзывов