Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 279 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-229
•
If you press “ Y ” (yes), you will then be prompted “ File Exists, Override? ”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” (yes) to continue with the save operation.
•
Press
°
(escape) again to return to the Database Programming menu.
Program CO Lines into the tenant group:
•
Use
¢£¤¥
to highlight “CO Line” and then press
«
.
•
Use
¢£¤¥
to highlight “Category 1” and then press
«
.
•
Use
¢£¤¥
and
³´
to highlight “Tenant Group” for the appropriate CO Line to program.
•
Press
«
until the appropriate tenant group number displays.
•
Use
¢£¤¥
and
³´
to highlight “Tenant Group” for the next CO Line to program and continue as
above until all CO Lines are programmed in the tenant groups.
•
When all changes are made press the
°
(escape) key to exit this database programming screen. You will
see the prompt: “ Exit This Feature ”; press “ Y ” for yes.
•
You will then be prompted to “ Save Current Setting ?”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” to save changes.
•
If you press “ Y ” (yes), you will then be prompted “ File Exists, Override? ”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” (yes) to continue with the save operation.
•
Press
°
(escape) again to return to the Database Programming menu.
Program Tenant Group Calling:
•
Use
¢£¤¥
to highlight “Call Handling” and then press
«
.
•
Use
¢£¤¥
to highlight “Tenant Calling” and then press
«
. The Tenant Group Calling screen and
table displays. Intercom calling is allowed from one tenant group to another.
•
Use
¢£¤¥
to highlight the “From” and “To” calling designation for the Tenant Group.
•
Press
«
until the appropriate setting displays. (Calling is allowed/denied from the Tenant Group listed on
the left to the Tenant Group listed across the top.
•
When all changes are made press the
°
(escape) key to exit this database programming screen. You will
see the prompt: “ Exit This Feature ”; press “ Y ” for yes.
•
You will then be prompted to “ Save Current Setting ?”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” to save changes.
•
If you press “ Y ” (yes), you will then be prompted “ File Exists, Override? ”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” (yes) to continue with the save operation.
•
Press
°
(escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “ SEND ” function has
been performed. Please refer to the Programming section of this manual to learn more about this procedure.