Comdial DX-80, Инструкция по установке и обслуживанию, Страница: 278 / 352

DX-80 I
NSTALLATION AND
M
AINTENANCE
M
ANUAL
P7290 IMM
3-228
•
Press [
chg
] until the appropriate tenant group for this CO Line displays.
•
Press
the Hold button
to enter a new CO Line to program.
Or…
•
Use the [
back
] or [
next
] button to skip to the appropriate database item.
Or…
•
Press
the Volume button
(up or down) to return to the DB Item Select screen.
Program Tenant Group Calling:
•
Input 03-29 . Then press [
save
]. This advances to Tenant Calling.
•
Press [
show
].
•
Input the Tenant Group for which changes are to be made. Then press [
show
]. The display shows the status
of
calling allowed
settings from this tenant group to the tenant group displayed.
TO TENANT 1:Y
back next chg
•
Press [
chg
] to select “ N ” if calling to this tenant group is to be denied.
Or…
•
Press [
next
] to skip to the tenant group to program.
•
Press
the Hold button
to return to the previous menu level or press
the Volume button (up or down)
to
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
«
.
Program extensions into the tenant group:
•
Use
¢£¤¥
to highlight “Extension” and then press
«
.
•
Use
¢£¤¥
to highlight “Category 1” and then press
«
.
•
Use
¢£¤¥
and
³´
to highlight “Tenant Group” for the appropriate extension to program.
•
Press
«
until the appropriate tenant group number displays.
•
Use
¢£¤¥
and
³´
to highlight “Tenant Group” for the next extension to program and continue as
above until all extensions are programmed in the tenant groups.
•
When all changes are made press the
°
(escape) key to exit this database programming screen. You will
see the prompt: “ Exit This Feature ”; press “ Y ” for yes.
•
You will then be prompted to “ Save Current Setting ?”
•
Press “ N ” to abort changes and leave all data unchanged.
•
Press “ Y ” to save changes.